Keg Safety Guide

Read before use:

• Petainer Kegs are designed for professional use only
• Petainer Kegs are designed for single use only, attempts to reuse a keg are not advised by Petainer and are done so at users’ own liability
• Refer to the symbols below to ensure kegs are in optimal condition for use
• For further support, contact your Petainer representative

Instructions:

• Avoid using solvents near the keg. Solvents can damage the PET material and cause a failure in the keg.
• Petainer Kegs are food safe approved and made with food grade PET.
• Store securely away from adverse weather. Sunlight and temperature fluctuations can impact the keg.
• Do not store on side, do not roll the keg.
• Keep away from sharp objects, keg is under pressure.
• Rough handling can damage the keg body and keg chimes and therefore the reliability of the product. Maximum working pressure of 3.1 Bar, 45 PSI.
• Maximum working pressure of 3.1 Bar, 45 PSI.
• Ensure that the keg is depressurised before recycling - refer to disposal instructions (p21).
• Store the kegs at a constant temperature. If storing at high heat, the shelf life of the keg is reduced.
• Stored at room temperature, kegs should be filled within 9 months of receipt.
• Keg fitting should be recycled in line with plastics code 7
• Keg body should be recycled in line with plastics code 1.
• Keg chimes should be recycled in line with plastics codes 2 or 5, marked on the chime.