Keg Safety Guide

Read before use:

Petainer Kegs are designed for professional use only
Petainer Kegs are designed for single use only, attempts to reuse a keg are not advised by Petainer and are done so at users’ own liability
Refer to the symbols below to ensure kegs are in optimal condition for use
For further support, contact your Petainer representative

Avoid using solvents near the keg. Solvents can damage the PET material and cause a failure in the keg.
Petainer Kegs are food safe approved and made with food grade PET.
Store securely away from adverse weather. Sunlight and temperature fluctuations can impact the keg.
Do not store on side, do not roll the keg.
Keep away from sharp objects, keg is under pressure.
Rough handling can damage the keg body and keg chimes and therefore the reliability of the product. Maximum working pressure of 3.1 Bar, 45 PSI.
Maximum working pressure of 3.1 Bar, 45 PSI.
Ensure that the keg is depressurised before recycling - refer to disposal instructions (p21).
Store the kegs at a constant temperature. If storing at high heat, the shelf life of the keg is reduced.
Stored at room temperature, kegs should be filled within 9 months of receipt.
Keg fitting should be recycled in line with plastics code 7
Keg body should be recycled in line with plastics code 1.
Keg chimes should be recycled in line with plastics codes 2 or 5, marked on the chime.